 |
 7 LCD TFT Touch Panel 169 Camera HD Monitor Field w HDMI for Canon 5D 7D $199.99 Time Remaining: 18d 13h 13m Buy It Now for only: $199.99 |
 Lilliput 8 869GL Touch Screen LCD Moinitor w DVI HDMI Input 1920x1080 Pixels $81.00 (9 Bids) Time Remaining: 1d 5h 5m |
 619AH 7 LCD TFT Touch Panel HD Monitor HDMI for Canon 5D 7D Nikon D300S D3S $199.97 Time Remaining: 18d 13h 13m Buy It Now for only: $199.97 |
 7 LCD 1080p Touch Panel 169 Monitor HDMI AC VGA for Car PC Camera Photography $139.99 Time Remaining: 29d 7h 48m Buy It Now for only: $139.99 |
 Lilliput 7TFT LCD On Camera HD Touch Screen Monitor with HDMI DVI VGA AV Input $230.00 Time Remaining: 2d 13h 33m Buy It Now for only: $230.00 |
 LILLIPUT 8 8 869GL 80NP C T Touch Screen LCD Car Monitor w HDMI DVI AV VGA $216.45 Time Remaining: 26d 8h 23m Buy It Now for only: $216.45 |
 8 TFT LCD Touch HDMI monitor for CarVGAPCCamera $159.99 Time Remaining: 17d 12h 29m Buy It Now for only: $159.99 |
 7 TFT LCD Touch Screen Monitor for CarVGAPCCamera $149.19 Time Remaining: 17d 12h 39m Buy It Now for only: $149.19 |
 ikan V8000T 8 Touch Screen TFT LCD Monitor NEW $405.00 Time Remaining: 28d 20h 4m Buy It Now for only: $405.00 |
 Lilliput 8 TFT LCD On Camera Touch Screen LCD Monitor DVI HDMI VGA AV Input $252.99 Time Remaining: 3d 6h 48m Buy It Now for only: $252.99 |
 8 4 wire Touch Screen TFT LCD VGA Camera Monitor W DVI HDMI Input 250 cd $208.80 Time Remaining: 18d 13h 35m Buy It Now for only: $208.80 |
 5 TFT LCD Touch Screen SKD Monitor DIY Module for ATM POS Medical Equipment $153.90 Time Remaining: 18d 13h 25m Buy It Now for only: $153.90 |
 LILLIPUT 8 LCD On Camera Monitor 869GL 80NP C T Touch Screen DVI HDMI Input $184.99 Time Remaining: 25d 10h 1m Buy It Now for only: $184.99 |
 New LILLIPUT 669GL 70NP C T 7 Touch Screen LCD Monitor with DVI HDMI Inpu $181.00 Time Remaining: 22d 6h 56m Buy It Now for only: $181.00 |
 New LILLIPUT 101 LCD Touch Monitor with HDMIDVI Input FA1011 NP C T $243.00 Time Remaining: 22d 6h 18m Buy It Now for only: $243.00 |
 New LILLIPUT FA1012 NP C T 101 LCD Monitor with Multi touch Function $288.00 Time Remaining: 24d 7h 35m Buy It Now for only: $288.00 |
 New LILLIPUT PC 745 7 WinCE PC with touch TFT LCD $316.00 Time Remaining: 22d 6h 6m Buy It Now for only: $316.00 |
 New LILLIPUT UM 70 C T 7 USB Touch Screen Monitor LCD $161.00 Time Remaining: 22d 6h 31m Buy It Now for only: $161.00 |
 7LCD HDMI 1080p Video Camera Tap Portable Touch Screen $279.99 Time Remaining: 16d 17h 51m Buy It Now for only: $279.99 |
 New LILLIPUT 869GL 80NP C T 8 Touch Screen LCD Monitor with DVI HDMI Input $240.00 Time Remaining: 24d 7h 50m Buy It Now for only: $240.00 |
How to do when LCD screen meet water damage
Here’s my Acer Aspire 5610 notebook with water damaged screen I’m going to fix.First of all remove the battery from the notebook.
Warning: the LCD screen can be easily damaged if you open it up. If you do something wrong the screen might become completely unusable and you’ll have to buy a new screen. It’s very expensive. Think twice before you decide opening the screen. Continue at your own risk.
On this model the inverter board is attached to the screen with two screws. Remove both screws, disconnect the screen cable and remove the inverter board.
Carefully peel off sticky tape and foil and put it aside. You’ll have to put it back in place during the screen reassembly.
Remove two screws from both sides of the screen.
Lift up rubber screw seals and remove all screws.
http://www.sunvalleyus.com/LCDPanel/
Carefully separate the screen bezel from the LCD cover and remove the bezel.
Remove two screws from the front and two screws from both sides.
Carefully remove the LCD screen from the cover and place it on the notebook base. Disconnect the video cable and the inverter board cable.
Carefully place the screen upside down on a flat surface. Carefully unglue the film that covers the circuit board and remove two screws from the board (top circles). I wasn’t really sure if I have to remove screws on the bottom, so I removed them just in case. Do not touch the circuit board with fingers.
After both screws are removed you should be able to lift up the circuit board. Be careful, it’s still attached to the LCD.
Start unsnapping the metal frame from the screen. There are a lot of latches on all sides of the screen. You can unlock them with nails or a small flathead screwdriver.
After all latches are opened you should be able to separate the screen into three pieces: metal frame, LCD and background (not sure about correct technical name).
If you have lint or dust inside the screen, probably you’ll find it between the LCD and the background. Do not touch LCD or background with your fingers. I was able to remove dust and lint up with a very soft cloth, barely touching the LCD and background surfaces.
After I split the screen I found that the background has a few some kind of optical layers (three transparent sheets) and in my case they were damaged by water. The water dried out and left stains between these optical layers.
In my case removing dust and lint wasn’t enough and I had to go further.
Very carefully separate the LCD with attached circuit board from the background.
To remove damaged optical layers it’s necessary to remove metal locks on both sides of the screen. It’s like a small clip that keeps layers in place.
After I removed both clips, I was able to look between the layers. At first I tried to clean up the dried water marks with a soft cloth but it didn’t help. The stains were still visible and didn’t want to go away.
Fortunately I had another similar screen laying around, it had a cracked LCD. I decided to borrow the optical layers from the cracked screen and transfer them to my screen. I wasn’t sure if it’s going to work, but as I mentioned before I didn’t really care if I break the screen. It was just an experiment.
So I disassembled the cracked screen and carefully transfered the white background and all transparent layers to my screen.
To avoide water damage ,you can use sleeve casehttp://www.sunvalleyus.com/Cooling-Laptop-Case/
After that I assembled my screen back removing dust and lint with a very soft cloth. Breathlessly connected my new screen to the notebook. Turned it on and…
That’s a miracle, it works!
About the Author
Sharp develops 3D touchscreen LCD : DigInfo